Skip to content
Logic ProFilesLogic ProFiles

Mix & Master

Parallel compression in Logic Pro — two easy methods

Parallel compression blends a heavily compressed copy of a sound with the untouched original. You keep the attack of the dry signal and add the density of the squashed one — a favourite on drums and vocals. Logic Pro's Compressor has a Mix knob that does it in one plug-in; a send to an aux gives you a separate fader for the compressed signal.

Owen Hartley Owen Hartley Updated Checked for Logic Pro 13
Dry drum waveform and squashed compressed waveform combining into one fuller waveform

Where to find it

Compressor > Mix knob, or a send to an aux channel

Two parallel compression setups — the Compressor Mix knob on one track versus a send to an aux with a compressor
One plug-in with the Mix knob, or a send to a dedicated aux.

Group the kit first with a Summing Stack, then add parallel compression to the stack's channel strip. Sends are explained in aux sends and buses.

Step by step

  1. 1

    Insert Compressor on the drums

    Use the drum track or the drum bus. A Summing Stack gives you one channel strip for the whole kit.

  2. 2

    Compress hard

    In Sound On Sound's 2016 walkthrough the ratio goes to 20:1 with a low threshold — far more than you'd use normally.

  3. 3

    Start fully dry

    Turn the Mix knob fully left so you hear only the dry signal.

  4. 4

    Blend in the compressed signal

    While the drums play, move Mix slowly to the right until the kit thickens but the hits keep their attack.

  5. 5

    Or use an aux instead

    Send the drums to a bus, put a hard-set Compressor on the aux and blend it in with the aux fader. Bypass the aux to compare.

Common mistakes

  • Compressing lightly — parallel compression works because the copy is squashed hard.
  • Letting the blended signal get louder than the dry one and judging by volume.

Mix knob or aux?

The Mix knob is quickest and keeps everything on one channel strip. The aux method takes an extra send but lets you EQ or automate the compressed signal separately, and several tracks can share it. Apple's help notes the efficiency of sends: one effect serves many channel strips.

Sources

Checked November 2026. Logic ProFiles is independent of Apple; menu names can differ slightly between Logic Pro versions.

Frequently asked questions

Does Logic Pro's Compressor have a wet/dry knob?

+

Yes. The Mix knob sets the balance between the dry source and the compressed signal, which is parallel compression in one plug-in.

What is New York compression?

+

Another name for parallel compression: blending a heavily compressed copy with the uncompressed original.