Mic distance to delay calculator
Sound needs about 3 ms to travel a metre, so a room mic hears everything later than a close mic. Enter the extra distance to see how much later — and how far to nudge a region.
The formula

Delay = distance ÷ speed of sound. In dry air at 20 °C sound travels about 343 m/s, roughly 3 ms per metre. Warmer air is faster; the calculator uses about 331.3 + 0.606 × °C m/s.
| Distance | Delay (20 °C) |
|---|---|
| 30 cm | ≈ 0.9 ms |
| 1 m | ≈ 2.9 ms |
| 3 m | ≈ 8.7 ms |
Lining up in Logic Pro
Move the later track earlier with a negative region Delay value, or delay the earlier one, then check the waveforms and listen for the fuller low end. See recording drums for multi-mic setups.
Sources
- sengpielaudio — Time delay and sound path calculator
- CMUSE — Sound travel time calculator (temperature table)
- Apple — Logic Pro for iPad: audio region parameters
Checked November 2026. Logic ProFiles is independent of Apple; menu names can differ slightly between Logic Pro versions.
Frequently asked questions
How much delay is one metre?
+
About 2.9 ms at 20 °C (343 m/s).
How do I shift a region by milliseconds in Logic Pro?
+
Use the Delay parameter in the Region inspector; negative values move the region earlier.
Related
- Dynamic or condenser: choosing a mic for Logic ProDynamic or condenser for home recording in Logic Pro: which suits vocals, guitar amps and untreated rooms, what phantom power is, and USB vs XLR microphones.
- How to record drums in Logic ProRecord a drum kit in Logic Pro: start with overheads, add kick and snare mics, give each mic its own input and track, then group them in a Track Stack.
- How to record acoustic guitar in Logic ProRecord acoustic guitar in Logic Pro with one or two mics: aim near the 12th fret about a foot away, use the 3:1 rule for two mics and set levels.
- Samples to milliseconds calculatorConvert samples to milliseconds and milliseconds to samples at any sample rate — useful for recording offsets, latency figures and sample delay settings.
- Room mode calculatorEnter your room's length, width and height to find axial room modes — the bass frequencies that boom or vanish at your mix position — in metres or feet.
- Audio calculatorsFree audio calculators for Logic Pro: buffer latency, file size, BPM to delay time, bars to time, tempo change, samples to ms and note frequency.