Skip to content
Logic ProFilesLogic ProFiles

Learn Logic Pro

Logic Pro tutorial for beginners — your first song in 9 steps

This tutorial takes you from a fresh install to a finished WAV file. Each step uses Logic Pro's own tools and links to a deeper guide when you want more. You need a Mac with Logic Pro 13 (or 12) and, if you'll record a voice or guitar, an audio interface — the Mac's built-in microphone works for a first test.

Owen Hartley Owen Hartley Updated Checked for Logic Pro 13
Nine numbered steps from installing Logic Pro to bouncing the first song around a Mac
LCD display in the control bar showing position, tempo 120, key C major and 4/4 time signature
Tempo, key and time signature live in the LCD at the top of the window.

Starter settings for a first project

Setting Where Starting point
Output and input device Settings > Audio > Devices Your interface, or built-in
I/O Buffer Size Settings > Audio > Devices Small for recording, larger for mixing
Tempo, key, time signature LCD in the control bar Defaults: 120 bpm, C, 4/4
Metronome K or the control bar button On while recording
Bounce format File > Bounce Uncompressed WAVE, 24-bit

Detailed help for each: new project settings, tempo and key, latency, Mastering Assistant and bouncing.

Step by step

  1. 1

    Get Logic Pro

    Buy it once on the Mac App Store or get it with Apple Creator Studio, which starts with a free month for new subscribers. Both download the same Logic Pro.

  2. 2

    Choose your audio device

    Choose Logic Pro > Settings > Audio > Devices and set Output Device and Input Device to your interface, or leave the built-in ones. Pick a small I/O Buffer Size for recording.

  3. 3

    Create a project

    Choose File > New from Template (Command-N), pick an empty project and add one audio track for your voice or guitar.

  4. 4

    Set tempo and key

    New projects start at 120 bpm in C, 4/4. Double-click the tempo in the LCD at the top to type a new value, and click the key to change it.

  5. 5

    Record a take

    Arm the track, press K to turn on the metronome if you want a click, then press R to record and the Space bar to stop.

  6. 6

    Add a drummer or bass player

    Add a Session Player track — drums, bass or keyboard — and choose a style in the Session Player Editor. Regenerate until a part fits.

  7. 7

    Edit the parts

    Trim, split and move regions in the Tracks area. Press Command-Z to undo anything you don't like.

  8. 8

    Mix

    Open the Mixer (X), balance the faders, add Channel EQ and Compressor where needed and put reverb on a send.

  9. 9

    Master and bounce

    Click Mastering on the Stereo Out to add Mastering Assistant, then choose File > Bounce > Project or Section (Command-B) and save a WAV.

Common mistakes

  • Recording with a large buffer and hearing yourself late — keep it small while recording, raise it for mixing.
  • Changing the key after adding Apple Loops without checking them — Apple says the project key affects Apple Loop playback.
  • Bouncing without checking the end of the song — set the range past the last note.

What to learn next

Learn ten key commands first — play, record, cycle, metronome, Mixer, Library and undo cover most of a session. Then read the interface overview so the window stops feeling crowded, and move on to mixing.

Sources

Checked November 2026. Logic ProFiles is independent of Apple; menu names can differ slightly between Logic Pro versions.

Frequently asked questions

Is Logic Pro good for beginners?

+

Yes. You can start with a handful of tools and add more as you go. Since Logic Pro 12 every feature is available from the start, so tutorials match what you see.

Do I need an audio interface to start?

+

No. You can use the Mac's built-in input and output, or work only with software instruments and Session Players. An interface helps once you record voice or guitar seriously.

How do I export my first song?

+

Choose File > Bounce > Project or Section, pick Uncompressed (WAV) or MP3, and click Bounce. Files go to ~/Music/Logic/Bounces by default.